Product Center
Product model: FST200-205
Product features:
● Aluminum alloy material ● Non -contact magnetic sensing measurement
● High weather resistance, high strength ● Excellent corrosion and water resistance
● Excellent strong anti-radio frequency, anti-electromagnetic interference
Applications:
● Railway ● Ropeway ● Aquaculture
● Port ● Wharf ● Crawler crane
● Meteorology ● Environment ● Tower crane
● Agriculture ● Greenhouse ● Power plant
FST200-205 Wind Speed and Direction Sensor is used to measure the direction value of wind speed and wind and convert it into an electrical signal. This signal can be directly transmitted to the recording device for processing.
FST200-205 Wind Speed and Direction Sensor shell is made of aluminum alloy material, and the special mold precision die casting process is used. The size tolerance is very small on the surface accuracy. A good adaptability to a bad environment. The cable connecting the plug-in is military. It has good anti-corrosion and corrosion resistance. It can ensure the long-term use of the instrument. At the same time, it is matched with the internal import bearing system to ensure the accuracy of wind speed and wind direction collection.
The circuit module PCB uses military -level A -level materials to ensure the stability of the parameters and the quality of the electrical performance; the electronic components use imported industrial-grade chips so that the overall anti -anti-electromagnetic interference ability can be guaranteed to ensure that the host is at -20 ° C ~ 50 ° C, humidity 35 % -85 % (non-condensed) range can work normally.
| Operating Voltage | 12-30VDC/12-30VDC/12-30VDC/15-30VDC |
| Output signal | 4-20mA/0-5VDC/Rs485/0-10VDC |
| Range |
Wind speed: 0-30m/s,0-60m/s; Wind direction: 16 directions or 8 directions (0-360 degrees) |
| Precision | Wind speed: ±3% (≥5m/s); wind direction: ±3 degrees |
| Maximum power consumption | Current type MAX≤500mW; RS485 type MAX≤300mW |
| Start wind speed | ≤0.5m/S |
| Surge protection | EMC Class III |
| Static protection | 15KV |
| Operating temperature | -40-85℃ |
| Working humidity | 0%~95%(non-condensing) |
| Protection level | IP65 |
【Sensor installation instructions】
1. Please install the sensor horizontally. The electrical connector should be aligned with the north during installation. The angle between the base and the horizontal plane should not exceed 5℃ to ensure that the sensor can accurately measure the wind speed and direction at low wind speeds;
2. The position and shape of the wind cup and windmill arm, wind direction rod and tail fin directly affect the accuracy of the sensor. Please do not grasp the wind cup, windmill arm, wind direction rod and tail fin during installation, so as not to damage the sensor structure and affect the measurement accuracy.
♦ Monitoring of high-altitude operations
♦ Monitoring and control of construction machinery operation process
♦ Meteorological station and environmental protection monitoring and control
♦ Port and terminal monitoring and control
ONLINE MESSAGE
WRITE A MESSAGE TO US
v
Contact us
Tel：
+86 731-86171990
Email：
sales@firstratesensor.com
Address： 4th Floor, Building 1, Zhitingyuan, Zhenhua Road, Yuhua District, Changsha City, Hunan Province，China.
